Kawasaki 841337 Use and Care Manual download pdf (Page 6)

INSTALLING / REMOVING SOCKET ON THE ANVIL

When removing the socket or bit from the tool, avoid

contact with skin and use proper protective gloves when grasping the socket,

bit or accessory. Accessories may be hot after prolonged use.

When installing a socket,

align the holes in the side of

the socket with the dent pin.

Press the socket on until the

dent pin engages in the hole.

To remove a socket, pull the

socket off the anvil.

OPERATING THE IMPACT WRENCH

Never tape the trigger switch down to provide continuous high speed. The

tool may fail under such conditions causing fire or personal injury.

Take care when working around a running engine. Run engine in open, well-

ventilated areas ONLY. Running an engine in an enclosed space will allow

build-up of carbon monoxide gas which can lead to dizziness, headaches,

vomiting or death.

Keep hair, clothing, cables or wires out of reach of moving parts while the

engine is running.

FUNCTIONAL DESCRIPTION

CONTROLS AND COMPONENTS:

1. Trigger Switch

2. Forward/Reverse Lever

3. Gear Enclosure

4. Anvil

5. Comfort Non-slip Grip

6. 12V Plug-in (fuse inside)

7. Bubble Level

8. Motor Fan Air Vent

ASSEMBLY

Always disconnect impact wrench from the power source

before installing,adjusting or removing any accessory in this tool, or before

performing maintenance. Failure to do so could result in injury.

9. Dent Pin

10. 12V Power Cord

11. LED Light

ACCESSORIES:

12. 1/2 in. (1.27 cm) Drive Impact

Socket (2)

13. 10A Fuse (2)

1 2 3 4 5 6 7 8 9

No comments

Kawasaki 841337 Use and Care Manual Page 6